AFTERCARE & WARRANTY

The coatings will cure enough to drive outside within 48 hours. Depending on the type of ceramic coating, the typical curing process takes up to two weeks. This is the period that we recommend waiting before washing the vehicle.

Whether you choose an entry-level Ceramic Pro Sport coating or a Gold Package, taking care of any ceramic-coated vehicle follows a simple six-step process.

Step 1: Always wash your coated car or vehicle every two weeks. With a ceramic coating, you must remove surface debris every few weeks. You can occasionally use a foam cannon and high-pressure hose to rinse and wash a ceramic-coated vehicle.

Step 2: Use the Two Bucket car wash technique. We strongly recommend completing a hand wash using the two-bucket car washing method at least once monthly. This will remove stubborn debris and contaminants, like bird droppings, tree sap, industrial toxins, pollen build-up, and more. These substances can lead to cross-contamination, reducing ceramic coatings’ hydrophobic properties.

Step 3: Use the Right Ceramic Coating Aftercare Soap. Americana Global Ceramic Aftercare shampoo is specifically formulated to maintain ceramic-coated vehicles. The key is not to use car soaps with wax or petroleum distillates or have high or low pH levels. You can use a foam gun or pressure washer and foam cannon for weekly standard home washing.

Step 4: Avoid washing direct sunlight or warm to the touch surfaces. Car washes should always be completed in the shade or early in the morning – late in the afternoon. The key is NOT to wash any warm or hot vehicle to the touch.

Step 5: Use a dedicated microfiber drying towel. Once washing the vehicle, use a dedicated microfiber drying towel to remove all standing water. This will help to reduce water spotting.

Step 6: Always follow up with annual inspections. Each Ceramic Pro coating package – including our Bronze Package, Silver Package, and Gold Package – and the new Ultimate Armor package will require an annual inspection completed by a certified Ceramic Pro auto detailing installer.

This allows them to complete a detailed decontamination wash, removing debris from the surface that can ‘clog the coatings.’ They’ll also be able to inspect the coating and apply a ceramic coating boost to improve the self-cleaning effect.

DO NOT:

• Abrade the surface: no hard brushing, no drive-thru car washes, no dry towel wiping
• Do not park under a shedding tree
• Do not leave hard water to dry on the paint during washing or from sprinklers

DO:

• If you need to clean, lubricate the surface with the recommended detail spray or wash solution
• Always use microfiber towels, especially during the curing process

Yes, this is normal. You may notice some small bubbles after your PPF installation. All should resolve themselves within ten days of installation. If they continue, contact your Elite Dealer directly.

DON’T:

• Do not use hard brushed or go through drive-thru car washes
• Avoid high-pressure hoses, especially along the edges of the films, as this can cause lifting
• Do not leave hard water sitting on the surface

DO:

• Lubricate the surface with recommended detail spray or wash soap
• Always use microfiber towels

Window tint is installed on the inside of the window.

DON’T:

• DO NOT roll the windows down for 72 hours after installation, as this can cause shifting or peeling
• Avoid all household ammonia-based cleaners as this can cause delamination
• DO NOT allow children to apply stickers to the windows
• No sharp objects near the film

DO:

• Use ammonia-free window cleaner and microfiber towels